Back to previous page

PRODUCT DATA SHEET

Provoca

Previous Next

The LED circuits are directly anchored to the aluminium casing of the body in order to maximize heat dissipation. Moreover, some dissipation fins have been included in the product design to increase the heat exchange surface with external air.The grid in the central part of the product allows natural air circulation, which cools the dissipation surface.Due to a natural convective motion, cold air removes heat from the dissipation grid, it heats up and moves upwards, through the lighting unit, getting new fresh air from the lower part. In this way, LEDs are maintained at a lower temperature and their life time and light efficiency increase. Consist of lighting unit and wall support.Lighting unit in painted die-cast EN-AB 47100 aluminium. High-performance asymmetrical optics in metalised polycarbonate.Screens in shock resistant, high transparent tempered glass.Wall support in painted steel. Painting is obtained with 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint. AISI 316 stainless steel screws and silicone seal gaskets. Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. ENEC approved. Insulation class I.

Download PDF
Anthracite Gray Gray/white




LED Palo


  • IP65
  • 650°
Provoca
Watt
Length Luminous Flux (lm) CCT Color Code Download
25W
45 cm
1502m
3000K
Anthracite gray Anthracite gray
T085430
Gray/white Gray/white
T085400
Misure Misure

LED Wall


  • IP65
  • 650°
Provoca
Watt
Length Luminous Flux (lm) CCT Color Code Download
25W
40 cm
1502lm
3000K
Anthracite gray Anthracite gray
T085430
Gray/white Gray/white
T085400
Misure

Accessories

Code
PROVOCA PALO 50X50 H 300 CM T085200
PROVOCA POLE palo H. 300cm grigio antracite T085220
PROVOCA ATTACCO X PALO T085500
PROVOCA POLE attacco palo grigio antracite T085520
PROVOCA ATTACCO A PARETE T085600
PROVOCA WALL supporto parete grigio antracite T085620

Designers

Projects

Family